MBS 300 Pressure Sensor that we are offering is popularly known among our customers owing to its superior design and performance. It is used to control and monitor industrial processes. It can also be used to measure variables including pressure, speed, water level, and altitude. Owing to its resilience and longevity, it is preferred by our customers. MBS 300 Pressure Sensor does not degrade in quality or become inferior in the long run. It can be purchased from us at a budget-friendly price.
Features :
Application
Cavitation, liquid hammer and pressure peaks may occur in hydraulic systems with changes in flow velocity, e.g. fast closing of a valve or when a pump starts and stops. The problem may occur on the inlet and outlet side of the application, even at rather low operating pressures.
Technical Specifications :
Accuracy (incl. non-linearity, hysteresis and repeatability) | 0.5% FS (typ.) | |
1% FS (max.) | ||
Non-linearity BFSL (conformity) | 0.2% FS | |
Hysteresis and repeatability | 0.1% FS | |
Thermal zero point shift | 0.1% FS / 10K (typ.) | |
0.2% FS / 10K (max.) | ||
Thermal sensitivity (span) shift | 0.1% FS / 10K (typ.) | |
0.2% FS / 10K (max.) | ||
Response time | Liquids with viscosity < 100 cSt | < 4 ms |
| Air and gases (MBS 3050) | < 35 ms |
Overload pressure (static) | 6 x FS (max. 1500 bar) | |
Burst pressure | 6 x FS (max. 2000 bar) | |
Power-up time | < 50 ms | |
Durability, P: 10 - 90% FS | >10x106 cycles |
Electrical specifications :
Nom. output signal (short-circuit protected) | 4 - 20 mA | 0-5, 1-5, 1-6 V | 0-10 V, 1-10 V | Ratiometric 10 - 90% of [UB |
Supply voltage [UB ], polarity protected | 9 -32 V DC | 9 -32 V DC | 15 32 V DC | 4.5 - 5.5 V DC |
Supply - current consumption | - | 5 mA | 8 mA | 5 mA at 5 V DC |
Supply voltage dependency | < 0.1% FS / 10 V | < 0.05% FS / 10 V | - | |
Ratiometricity - | - | - | < 0.05% FS / 4.5 - 5.5 V | |
Output limitation | 22.4 mA | 0-5V: 5.75 V | 0-10V: 11.5 V | supply voltage |
Sink / Source | - | < 1 mA | ||
Load [RL] (load connected to 0 V) | RL(UB 9V) / 0.02 A | RL 10 k | RL15 k | RL10 at 5 V DC |